Is your wireless charger flashing while it is charging your phone or another mobile device? A blinking wireless charger is a frequent scenario that typically indicates a fault needing correction without the need for specialised tools or materials.
In the following sections, you will find clear instructions and suggestions that help you identify and resolve common causes behind a blinking wireless charger. By understanding the indications and following the recommended procedures, you can continue enjoying safe and effective charging without unnecessary disruption.
Common Causes of a Blinking Wireless Charger
The colour of the blinking lights on a wireless charger acts as an indicator of the problem it is encountering. For instance, a blue blink usually signifies a connection fault. Below are some prevalent reasons why your wireless charger might be blinking:
- Foreign Object Detection
Wireless chargers may blink if there is an extraneous item obstructing the contact between the charger and your device. Metallic items such as coins or keys can disrupt the charging process, triggering a safety response to protect both the charger and the device from damage.
- Alignment Issues
To achieve optimal charging performance, the device must be positioned correctly on the charging pad. Misplacement may prompt the charger to emit blinking signals, indicating that the device is not suitably aligned with the charging coil. Certain models, such as a Samsung charger emitting a yellow blink, signal entry into Abort Mode, thus halting the charging process.
- Overheating
An additional cause for blinking is overheating. Wireless chargers are equipped with built-in safety mechanisms that monitor temperature. Should the charger or device become excessively hot, the blinking light indicates that caution is required to prevent thermal damage.
- Faulty Cable or Adapter
A damaged cable or adapter might result in inadequate power transfer to the charger, leading to intermittent blinking. This condition signals an unstable power supply; substituting the cable or adapter with a known, reliable alternative often resolves the issue.
- Software Issues
Occasionally, firmware bugs or software glitches affecting either the charger or the connected device can disrupt the charging cycle, prompting the charger to blink. Updating the relevant software or firmware frequently remedies such issues.
How to Fix Blinking Issues on Your Wireless Charger?
When encountering blinking on wireless chargers, the approach depends on the displayed light colour. For example, a blue blink may require you to plug the charger into a different power outlet. Consider the following troubleshooting methods to resolve common causes:
- Remove Foreign Objects
Begin by inspecting the charger’s surface and the area between the charger and the device. Remove any obstructive items to ensure proper electrical contact. Keeping the charging area spotless supports efficient functionality and prevents interruptions during the charging cycle.
- Realign the Device
Ensure that your device is correctly placed on the charging pad. Adjust its position so the charging coil is in optimal contact with the device. Should the blinking persist, gently repositioning the device can often lead to a resolution.
- Cool Down the Charger
If excessive heat is the problem, disconnect the charger from its power source and allow it, along with your device, to cool naturally. This cooling phase typically lasts a few minutes and permits the dissipation of any accumulated heat. Once the system has stabilised at a lower temperature, reconnect to see if the blinking has ceased.
- Replace the Cable or Adapter
Examine the cable and adapter for visible signs of wear or damage. If any faults are detected, substitute them with high-quality, certified alternatives. An unstable power supply caused by inferior accessories is a frequent trigger for blinking indicators, and replacing these components should resolve the issue.
- Update Software or Firmware
Ensure that both your device and the charger’s firmware are current. Manufacturers periodically release updates that address bugs and improve performance. Installing these updates can rectify software-induced blinking. For instance, a red blinking light might indicate that the phone does not support wireless charging or that it is incompatible with the charger.
- Reset the Charger
As a final measure, you may reset the charger. To do so, unplug it from the power socket, wait a few seconds, and then reconnect. This simple action can reinitialise the system and clear temporary faults, restoring normal charging operations.
Preventative Strategies for Future Use
Wireless charging offers multiple advantages over traditional cable charging; however, it also presents unique maintenance challenges. Employ these preventative strategies to sidestep potential issues:
- Maintain a Clean Charging Surface
Regularly inspect and clean the charging area to eliminate any foreign objects. A clear and clean pad ensures uninterrupted contact between the charger and the device, thereby reducing the risk of erroneous blinking due to interference.
- Ensure Correct Device Positioning
Always place your device in the optimally designed area of the charging pad. Some users find it beneficial to mark the ideal position on the charger itself. Correct placement promotes efficient charging and mitigates the risk of misalignment.
- Monitor Operating Temperature
Avoid utilising your charger in overly warm environments. Constant monitoring of the charger and the device’s temperature can prevent recurring overheating incidents. If you find that the system tends to overheat, consider utilising a cooling accessory to maintain a safe operating temperature.
- Use High-Quality Accessories
Investing in superior-quality cables and adapters is crucial. Low-grade alternatives may contribute to an unstable power supply, leading to blinking issues. Certified accessories from reputable manufacturers support a more reliable charging experience.
- Regular Software Maintenance
Periodically check for and install updates for both your device and the charger. Regularly updated software ensures that performance-related bugs are minimised and overall functionality is maintained. This proactive approach prevents potential glitches that could result in inconsistent charging behaviour.
- Avoid Overloading the Charger
It is advisable not to attempt charging multiple devices concurrently if your charger is not designed for simultaneous usage. Overloading the system can cause imbalanced power distribution, which may result in the charger blinking repeatedly. Charging one device at a time ensures steady power delivery.
For those seeking reliable and efficiently designed wireless charging options, consider these reputable products from Anker:
Anker MagGo 3-in-1 Wireless Charging Station allows you to power up your iPhone, AirPods, and Apple Watch simultaneously. Its adjustable module caters to different device sizes, ensuring a neat and organised charging setup while saving valuable desk space.
Engineered to charge your iPhone and earbuds at the same time, Anker MagGo 2-in-1 Wireless Charger Stand features adjustable angles for optimal viewing. Clear LED indicators provide at-a-glance information regarding the charging status of your devices, making it a dependable addition for both workspaces and bedside tables.
Conclusion
When you observe your wireless charger blinking, consulting the light codes provided in the user manual or on the manufacturer’s website is the first step. Carry out the recommended actions, such as removing obstructions, ensuring proper alignment, and checking the power supply components. Should the problem persist, it is advisable to take the charger or your device to an authorised service centre for a thorough inspection and repair.
FAQs
What does it mean when my wireless charger blinks?
A blinking indicator typically signifies an issue with the charging process. The light colour often denotes the precise problem; for example, a blue blink might reveal an interference between the charger’s adapter and the phone, while other colours point to different faults.
Is it safe to use a wireless charger if it is blinking?
It is not recommended to continue using a charger that exhibits blinking lights. Such behaviour suggests underlying problems that may lead to ineffective charging or potential damage to your device. It is best to identify and remedy the cause before resuming normal use.
Why is my wireless charger blinking green and not charging?
In some models, a green blinking light indicates that the charger is in standby mode or is not receiving enough power to charge your device effectively. Ensure that factors such as a thick phone case are not obstructing the process; try charging without it to determine if the blinking ceases.
Be the First to Know
